EP film
Extreme-pressure additives help protect hypoid and spiral-bevel teeth under shock load.
Gear Oils
Gear EP Oils
Protection for manual transmissions, gear cases, drive axles and final drives in passenger, commercial and off-highway equipment.
Product family
Extreme-pressure protection for gears that see shock load.
EP gear oils are built for hypoid axles, manual transmissions and industrial gear cases where sliding contact needs extra film strength. They are not interchangeable with ATF or engine oil.
GL rating, viscosity and whether limited-slip additive is required will come from approved data. Sample grades below keep the table populated for layout review.
Request Product Guidance
80W/90
Primary grade
GL-5
Performance level
EP
Additive type
Axle
Typical use
What this family is for
Formulated around the conditions that matter
Axle duty
Supports differentials and final drives in passenger, commercial and off-highway equipment.
Seal care
Viscosity grades are chosen so the oil stays in the case without starving the mesh at start-up.
Sample grades
Viscosity options in this family
Placeholder rows only. Replace with approved grades, specs and typical-use notes when the product data is ready.
| Grade | SAE | Typical use |
|---|---|---|
| 80W/90 | 80W-90 | Manual transmissions and light-to-medium axles |
| 85W/140 | 85W-140 | Heavier axles and hotter ambient service |
| 75W/90 | 75W-90 | Colder climates and selected synthetic gear fills |
